Treasury Regulations · 26 CFR
§ 1.614-3. Rules relating to separate operating mineral interests in the case of mines.
Regulation text, no changes From the eCFR, current as of October 15, 2026. The eCFR is an authoritative but unofficial editorial compilation of the Code of Federal Regulations; the official text is the annual CFR on govinfo. Compare it with this section on ecfr.gov (external site) or the official annual CFR on govinfo (external site).
Regulation under 26 U.S.C. § 614
Cite as 26 CFR § 1.614-3
At a glance
Read from the text and its source citation. Not part of the regulation.
- Status
- In the current eCFR
- Issued
- January 10, 1961 by T.D. 6524
- Last amended
- September 12, 1978 by T.D. 7564
- Issued under
- 26 U.S.C. § 614
- Length
- 10,189 words · about 44 min to read
- Defines
- 5 terms
- Cross-references
- cites 7 Code sections and 5 regulations; cited by 3
In 1958, taxpayer A acquired two separate operating mineral interests designated No. 1 and No. 2. Each is an interest in a single mineral deposit in a single tract of land. In the same year, taxpayer A made his first development expenditure with respect to a mine on operating mineral interest No. 1 and a mine on operating mineral interest No. 2. Operating mineral interests Nos. 1 and 2 are operated as a unit. Taxpayer A did not elect to aggregate operating mineral interests Nos. 1 and 2 under section 614(c)(1) within the time prescribed for making such an election. In 1960 taxpayer A made his first development expenditure with respect to a second mine on operating mineral interest No. 2. Taxpayer A elected under section 614(c)(2) to treat operating mineral interest No. 2 as two separate operating mineral interests, designated as Nos. 2(a) and 2(b), for the taxable year 1960 and all subsequent taxable years. No. 2(a) contained the mine for which the first development expenditure was made in 1958, and No. 2(b) contained the mine for which the first development expenditure was made in 1960. If taxpayer A wishes to do so, he may elect to aggregate mineral interests Nos. 1 and 2(b) under section 614(c)(1) for the taxable year 1960 and all subsequent taxable years since the first development expenditure with respect to the mine on operating mineral interest No. 2(b) was made during the taxable year 1960. Taxpayer A may not elect to aggregate mineral interests Nos. 1 and 2(a) under such section since the time for making such an election has expired.
Except as provided in subparagraphs (2) and (3) of this paragraph, the election under section 614(c)(2) and paragraph (b) of this section to treat a single operating mineral interest as more than one operating mineral interest shall be made under section 614(c)(3)(A) not later than the time prescribed by law for filing the taxpayer's income tax return (including extensions thereof) for whichever of the following taxable years is the later:
However, if the latest time at which an election may be made under this subparagraph falls on or before May 1, 1961, such election may be made or modified at any time on or before May 1, 1961. See paragraph (c) of § 1.614-6 as to the binding effect of an election where the basis of a separate operating mineral interest in the hands of the taxpayer is determined by reference to the basis in the hands of a transferor.
In accordance with section 614(c) (3)(B), the election under section 614(c)(2) and paragraph (b) of this section to treat an operating mineral interest as more than one operating mineral interest may, at the election of the taxpayer, be made not later than the time prescribed by law for filing the taxpayer's income tax return (including extensions thereof) for whichever of the following taxable years is the later:
However, if the latest time at which an election may be made under this subparagraph falls on or before May 1, 1961, such election may be made or modified at any time on or before May 1, 1961. See paragraph (c) of § 1.614-6 as to the binding effect of an election where the basis of a separate operating mineral interest in the hands of the taxpayer is determined by reference to the basis in the hands of a transferor.
In 1953, taxpayer A owned six separate operating mineral interests, designated No. 1 through No. 6, which he operated as a unit. Operating mineral interests Nos. 1 through 5 comprise a mine, and operating mineral interest No. 6 represents one mineral deposit in a single tract of land which is being extracted by means of two mines. In accordance with section 614(c)(3)(B) and subparagraph (2) of this paragraph, taxpayer A elects under section 614(c)(2) to treat operating mineral interest No. 6 as two separate operating mineral interests for the taxable year 1954 and all subsequent taxable years. Unless taxpayer A also makes an election under section 614(c)(1) to aggregate operating mineral interests Nos. 1 through 5 for the taxable year 1954 and all subsequent taxable years in accordance with section 614(c)(3)(B) and subparagraph (2) of this paragraph, he shall be deemed to have made an election to treat each of such interests as a separate property. Taxpayer A may not elect, under section 614(c) (1) and (3)(A), to aggregate operating mineral interests Nos. 1 through 5 for the taxable year 1958 or any subsequent taxable year.
(a) Whether the taxpayer is making an election or elections with respect to the operating unit in accordance with section 614(c)(3) (A) or (B);
(b) A description of the operating unit of the taxpayer in sufficient detail to identify the operating mineral interests which are included within such operating unit;
(c) A description of each aggregation to be formed within the operating unit in sufficient detail to show that each aggregation consists of all the separate operating mineral interests which comprise any one mine or any two or more mines;
(d) A description of each separate operating mineral interest within the operating unit which is to be treated as a separate property in sufficient detail to show that such interest is not a part of any mine for which an election to aggregate has been made;
(e) The taxable year in which the first expenditure for development or operation was made by the taxpayer with respect to each separate operating mineral interest within the operating unit, but if the first expenditure for development or operation has not been made with respect to a separate operating mineral interest before the close of the taxable year for which the election under this section is made, such information should also be included;
(f) A description of each separate operating mineral interest within the operating unit which the taxpayer elects to treat as more than one such interest under section 614(c)(2) in sufficient detail to show that the separate operating mineral interest was not a part of an aggregation formed by the taxpayer under section 614(c)(1) for any taxable year prior to the taxable year for which the election under section 614(c)(2) is made, and to show that the mineral deposit representing the separate operating mineral interest is being developed or extracted by means of two or more mines;
(g) The taxable year in which the first expenditure for development or operation was made by the taxpayer with respect to each mine on the separate operating mineral interest that the taxpayer is electing to treat as more than one such interest; and
(h) The allocation of the mineral deposit representing the separate operating mineral interest between (or among) the newly formed interests and the method by which such allocation was made
For the purpose of applying subdivisions (e) and (g) of this subdivision, if the first expenditure for development or operation with respect to a separate operating mineral interest or a mine was made prior to the first taxable year for which the election with respect to such interest or mine is applicable, the taxpayer may state that such is the case in lieu of identifying the exact taxable year in which such first expenditure was made. In any case where part of the information required under this subdivision can be adequately supplied by means of appropriately marked maps, the statement may be accompanied by such maps and may omit the required descriptive material to the extent replaced by the maps. The taxpayer shall maintain adequate records and maps in support of the above information. In the event that the first expenditure for development or operation with respect to a separate operating mineral interest is made by the taxpayer in a taxable year subsequent to the taxable year for which an election under this section has been made with respect to the operating unit of which such interest is a part, the taxpayer shall furnish information describing such interest in sufficient detail to identify it as a part of such operating unit, to show whether it is a part of a mine with respect to which the interests have previously been aggregated or have previously been treated as separate properties, and to indicate whether it is to be included within an aggregation.
In 1958, taxpayer A owned ten operating mineral interests, designated No. 1 through No. 10, which he operated as a unit. Interests Nos. 1 through 5 comprised mine X, and interests Nos. 6 through 10 comprised mine Y. Taxpayer A had made his first development expenditure with respect to each of the ten interests before January 1, 1958. Taxpayer A elected under section 614(c) (1) and (3)(A) to aggregate interests Nos. 1 through 8 for 1958 and all subsequent taxable years. The aggregation formed by taxpayer A is an invalid basic aggregation because it does not include all the operating mineral interests which comprise a complete mine or mines. Therefore, interests Nos. 1 through 8 must be treated as separate properties for 1958 and all subsequent taxable years unless consent is obtained from the Commissioner to treat any of such interests in a different manner.
In 1958, taxpayer B owned ten operating mineral interests designated No. 1 through No. 10. Interests Nos. 1 through 5 comprised mine X, and interests Nos. 6 through 10 comprised mine Y. Taxpayer B had made his first development expenditure with respect to each of the ten interests before January 1, 1958. Taxpayer B elected under section 614(c) (1) and (3)(A) to aggregate interests Nos. 1 through 10 for 1958 and all subsequent taxable years. Upon audit, it was determined that mines X and Y were in two separate operating units. Therefore, the aggregation formed by taxpayer B is invalid, and interests Nos. 1 through 10 must be treated as separate properties for 1958 and all subsequent taxable years unless consent is obtained from the Commissioner to treat any of such interests in a different manner.
In 1958, taxpayer A owned six operating mineral interests, designated No. 1 through No. 6, which he operated as a unit. Interests Nos. 1 through 3 comprised mine X, and interests Nos. 4 through 6 comprised mine Y. Taxpayer A had made his first development expenditure with respect to each of the six interests before January 1, 1958. Taxpayer A elected under section 614(c) (1) and (3)(A) to aggregate interests Nos. 1 through 3 for 1958 and all subsequent taxable years. He elected to treat interests Nos. 4 through 6 as separate properties for 1958 and all subsequent taxable years. In 1959, taxpayer A acquired and made his first development expenditure with respect to interest No. 7. Interest No. 7 was a part of the mine composed of interests Nos. 4 through 6. Taxpayer A elected under section 614(c) (1) and (3)(A) to aggregate interest No. 7 with the aggregation of interests Nos. 1 through 3 for 1959 and all subsequent taxable years. Interest No. 7 is an invalid addition and must be treated as a separate property for 1959 and all subsequent taxable years. It cannot be aggregated with interests Nos. 4 through 6 since taxpayer A has previously elected to treat such interests as separate properties. However, the valid basic aggregation composed of interests Nos. 1 through 3 is not affected by the invalid addition of interest No. 7.
Assume the same facts as in example 1 except that taxpayer A elected under section 614(c) (1) and (3)(A) to aggregate interests Nos. 1 through 3 as one aggregation and interests Nos. 4 through 6 as another aggregation for 1958 and all subsequent taxable years. The aggregation of interest No. 7 with the aggregation consisting of interests Nos. 1 through 3 constitutes an invalid addition. Interest No. 7 must be included in the aggregation consisting of interests Nos. 4 through 6 for 1959 and all subsequent taxable years.
In 1958, taxpayer B owned three operating mineral interests, designated No. 1 through No. 3, which comprised mine X. Taxpayer B had made his first development expenditure with respect to each of the three interests before January 1, 1958. Taxpayer B elected under section 614(c) (1) and (3)(A) to aggregate interests Nos. 1 through 3 for 1958 and all subsequent taxable years. In 1959, taxpayer B acquired interests Nos. 4 through 7 which comprised mine Y. Taxpayer B made his first development expenditure with respect to each of the four interests during 1959. Taxpayer B elected under section 614(c) (1) and (3)(A) to aggregate interests Nos. 4 through 6 and to aggregate interest No. 7 with the aggregation consisting of interests Nos. 1 through 3 for 1959 and all subsequent taxable years. The aggregation consisting of interests Nos. 4 through 6 is an invalid basic aggregation, and the aggregation of interest No. 7 is an invalid addition. Interests Nos. 4 through 7 must be treated as separate properties for 1959 and all subsequent taxable years unless consent is obtained from the Commissioner to treat such interests in a different manner.
In 1954, taxpayer A owned two operating mineral interests designated Nos. 1 and 2. Interest No. 1 was in the production stage prior to 1954. The first exploration expenditures with respect to interest No. 2 were made by taxpayer A in 1954 and were deducted under section 615(a) on his return for that year. In 1955, taxpayer A made his first development expenditure with respect to interest No. 2, and thereafter it was operated with interest No. 1 as a unit. Taxpayer A elected under section 614(c) (1) and (3)(B) to form an aggregation of interests Nos. 1 and 2 for 1955 and all subsequent taxable years. Taxpayer A must recompute his tax for 1954 in accordance with this paragraph.
Assume the same facts as in example 1 except that, in 1957, taxpayer A acquired another operating mineral interest, designated No. 3, made his first exploration expenditures with respect to such interest in that year, and deducted such expenditures under section 615(a) on his return for that year. In 1958, taxpayer A made his first development expenditure with respect to interest No. 3. Interest No. 3 was part of the same operating unit as interests Nos. 1 and 2. Taxpayer A elected under section 614(c) (1) and (3)(B) to add interest No. 3 to his aggregation of interests Nos. 1 and 2 for 1958 and all subsequent taxable years. Taxpayer A must recompute his tax for 1957 in accordance with this paragraph.
In 1956, taxpayer A acquired two operating mineral interests designated Nos. 1 and 2. Interest No. 1 was in the production stage at that time. Taxpayer A made his first exploration expenditures with respect to interest No. 2 in 1956, 1957, and 1958 and deducted such expenditures under section 615(a) on his returns for such years. In 1959, taxpayer A made his first development expenditure with respect to interest No. 2. Interests Nos. 1 and 2 were operated as a unit. Taxpayer A elected under section 614(c) (1) and (3)(A) to aggregate interests Nos. 1 and 2 for 1959 and all subsequent taxable years. Only the exploration expenditures deducted by the taxpayer for 1958 must be taken into account for purposes of applying subparagraph (1) of this paragraph.
In 1954, taxpayer B owned two operating mineral interests, designated Nos. 1 and 2, which he operated as a unit. Interest No. 1 was in the production stage at that time, and interest No. 2 represented one mineral deposit in a single tract of land which was being extracted by means of two mines. Under section 614(c) (2) and (3)(B), taxpayer B elects to treat interest No. 2 as two separate operating mineral interests, designated as Nos. 2(a) and 2(b), for 1954 and all subsequent taxable years. In 1955, taxpayer B acquired operating mineral interest No. 3. He made his first exploration expenditures with respect to interest No. 3 in 1955, 1956, and 1957 and deducted such expenditures under section 615(a) on his returns for such years. In 1958, taxpayer B made his first development expenditure with respect to interest No. 3, and thereafter it was operated with interests Nos. 1, 2(a), and 2(b) as a unit. Taxpayer B elects under section 614(c) (1) and (3)(B) to aggregate interests Nos. 1 and 3 for 1958 and all subsequent taxable years. The exploration expenditures deducted by the taxpayer for 1955, 1956, and 1957 must be taken into account for purposes of applying subparagraph (1) of this paragraph since the taxpayer has made an election under section 614(c)(2) with respect to the operating unit of which interest No. 3 is a part and such election applies to the taxable years 1955, 1956, and 1957.
In 1958, taxpayer A acquired two operating mineral interests, designated Nos. 1 and 2, which he operated as a unit. Each interest was an interest in a single mineral deposit in a single tract or parcel of land. There was a mine in the production stage of each of two interests at that time. Taxpayer A elected under section 614(c)(1)(B) to treat interests Nos. 1 and 2 as separate properties. In 1959 and 1960, taxpayer A made exploration expenditures with respect to interest No. 2 for the purpose of extracting the mineral by means of a second mine, and he deducted such expenditures on his returns for such years. In 1961, taxpayer A made his first development expenditure with respect to a second mine on interest No. 2. Taxpayer A elected under section 614(c)(2) to treat interest No. 2 as two separate operating mineral interests, designated as Nos. 2(a) and 2(b), for 1961 and all subsequent taxable years. Interest No. 2(a) contained the producing mine and interest No. 2(b) contained the subsequently developed mine. In his return for 1961, taxpayer A also elected under section 614(c)(1)(A) to aggregate interests Nos. 1 and 2(b) for 1961 and all subsequent taxable years. The exploration expenditures deducted with respect to interest No. 2 prior to the effective date of the formation of interests Nos. 2(a) and 2(b) need not be taken into account for purposes of applying subparagraph (1) of this paragraph.
In 1954, taxpayer B owned two operating mineral interests designated Nos. 1 and 2. Interest No. 1 was an interest in a single mineral deposit in a single tract of land which was being extracted by means of two mines. Taxpayer B elected under section 614(c) (2) and (3)(B) to treat interest No. 1 as two separate operating mineral interests, designated as Nos. 1(a) and 1(b), for 1954 and all subsequent taxable years. In 1955, 1956, and 1957, taxpayer B made exploration expenditures with respect to interest No. 2 and deducted such expenditures on his returns for such years. In 1958, taxpayer B made his first development expenditure with respect to interest No. 2, and, on his return for that year, taxpayer B elected to aggregate interests Nos. 1(a) and 2 under section 614(c)(1) for 1958 and all subsequent taxable years. The exploration expenditures deducted with respect to interest No. 2 for 1955, 1956, and 1957 shall be taken into account for purposes of applying subparagraph (1) of this paragraph since such exploration expenditures were deducted with respect to an interest to which this subdivision does not apply.
(a) The taxpayer had elected to form an aggregation for the taxable year for which the recomputation is required to be made, and
(b) Such aggregation had included all the interests included in the aggregation formed under section 614(c)(1) except those interests which the taxpayer did not own during the taxable year for which the recomputation is required to be made and those interests in respect of which the taxpayer had made no expenditures for exploration, development, or operation before or during the taxable year for which the recomputation is required to be made
If a recomputation of tax is required to be made for any taxable year in the case of the aggregation of an additional interest to an existing aggregation under section 614(c)(1), such recomputation shall be made as if:
(c) The taxpayer had elected to form an aggregation for the taxable year for which the recomputation is required to be made, and
(d) Such aggregation had included all the interests included in the aggregation formed under section 614(c)(1) (including any interest which the taxpayer had disposed of prior to the date on which the aggregation of the additional interest becomes effective) except those interests which the taxpayer did not own during the taxable year for which the recomputation is required to be made and those interests in respect of which the taxpayer had made no expenditures for exploration, development, or operation before or during the taxable year for which the recomputation is required to be made
For purposes of this paragraph, any aggregation which is treated as having been formed under subdivisions (a) and (b) or under subdivisions (c) and (d) shall be referred to as the constructed aggregated property.
Assume that taxpayer A elects under section 614(c)(1) to form an aggregation for 1960 and all subsequent taxable years. Assume further that taxpayer A is required to recompute his tax for four prior taxable years under subparagraphs (1) and (2) of this paragraph and that the recomputation for each of such taxable years results in a reduction of taxpayer A's depletion allowance. Under subdivision (i) of this subparagraph, the total increase in tax resulting from the recomputation is to be taken into account in equal installments in 1960, 1961, 1962, and 1963. However, if the total increase in tax is not determinable until 1961 because the recomputation for the prior taxable years results in the reduction of a net operating loss carryover to 1961, then the total increase shall be taken into account in equal installments in 1961, 1962, and 1963. In like manner, if the total increase in tax is not determinable until 1962, it shall be taken into account in equal installments in 1962 and 1963.
However, the adjusted basis of an aggregated property formed under section 614(c)(1) may be increased only to the extent such excess would have resulted in an increase in such adjusted basis if taken into account under paragraph (a) of § 1.614-6. Thus, if depletion previously allowed with respect to the separate operating mineral interests included in the aggregation formed under section 614(c)(1) exceeds the total of the unadjusted bases of such interests by $5,000, and if the recomputation of tax required to be made under this paragraph results in a depletion allowance which is $7,000 less than the depletion actually deducted with respect to such interests, then the adjusted basis of such aggregation may be increased by only $2,000. If, with respect to the same aggregated property formed under section 614(c)(1), adjustments to adjusted basis are required under this subparagraph as a result of recomputation of tax for two or more taxable years, the total or net amount of such adjustments shall be taken into account. Any adjustment to the adjusted basis of an aggregation required by this subparagraph shall be taken into account as of the effective date of the election to form such aggregation under section 614(c)(1) and shall be effective for all purposes of subtitle A of the Code. For other rules relating to the determination of the adjusted basis of an aggregated property, see paragraph (a) of § 1.614-6.
[T.D. 6524, 26 FR 150, Jan. 10, 1961, as amended by T.D. 7170, 37 FR 5382, Mar. 15, 1972; T.D. 7564, 43 FR 40494, Sept. 12, 1978]
Terms defined here
Where the text says “the term … means”. Select a term to jump to its definition.
Cross-references
Computed from the citations in the text of 26 CFR.
Code sections it cites
- § 614 Definition of property
- § 167 Depreciation
- § 615 Repealed
- § 170 Charitable, etc., contributions and gifts
- § 57 Items of tax preference
- § 172 Net operating loss deduction
- § 56 Adjustments in computing alternative minimum taxable income
Regulations it cites
- § 1.614-2 Election to aggregate separate operating mineral interests under section 614(b) prior to its amendment by Revenue Act of 1964.
- § 1.614-6 Rules applicable to basis, holding period, and abandonment losses where mineral interests have been aggregated or combined.
- § 1.611-2 Rules applicable to mines, oil and gas wells, and other natural deposits.
- § 1.613-5 Taxable income from the property.
- § 1.58-7 Tax preferences attributable to foreign sources; preferences other than capital gains and stock options.
Cited by 3 other regulations
Amendment history
From the source citation at the end of the section, newest first. T.D. is a Treasury decision; FR is the Federal Register.
- Amended by T.D. 7564 (43 FR 40494)
- Amended by T.D. 7170 (37 FR 5382)
- Issued by T.D. 6524 (26 FR 150)
Where it sits in 26 CFR
- Subchapter A Income tax
- Part 1 Income taxes
- Natural Resources
Nearby sections
- § 1.613A-7 Definitions.
- § 1.614-0 Introduction.
- § 1.614-1 Definition of property.
- § 1.614-2 Election to aggregate separate operating mineral interests under section 614(b) prior to its amendment by Revenue Act of 1964.
- § 1.614-3 Rules relating to separate operating mineral interests in the case of mines.
- § 1.614-4 Treatment under the Internal Revenue Code of 1939 with respect to separate operating mineral interests for taxable years beginning before January 1, 1964, in the case of oil and gas wells.
- § 1.614-5 Special rules as to aggregating nonoperating mineral interests.
- § 1.614-6 Rules applicable to basis, holding period, and abandonment losses where mineral interests have been aggregated or combined.
- § 1.614-7 Extension of time for performing certain acts.